A remodel at Black Butte Ranch usually involves two reviews: a Deschutes County building permit, because the Ranch is in unincorporated county, and whatever approval the Ranch's Architectural Review Committee requires under its own guidelines. Oregon's R327 wildfire code, in effect since April 1, 2026, applies to new homes and new accessory structures here, not to remodels or additions.
Why is a Ranch remodel different from a remodel in town?
Black Butte Ranch is not inside a city. It sits in unincorporated Deschutes County, in the county's Resort Community Zone. That means the building permit comes from the Deschutes County Building Safety Division, not from the City of Sisters or the City of Bend.
The Ranch also has its own Architectural Review Committee. The official Black Butte Ranch directory lists the ARC and gives a public contact: (541) 595-1529 and arc@blackbutteranch.com. The Ranch site also posts ARC meetings. What we have not obtained is a current, official copy of the Ranch design guidelines or a public checklist of which remodel items need ARC review. Until you have that document from the Ranch, do not assume a project is exempt, and do not assume every interior-only job needs committee review either. Ask the ARC.
County zoning and Ranch review are not the same thing. You can need one, the other, or both.
What does Deschutes County require at the Ranch?
For construction that needs a building permit — many remodels, additions, and any new home — the application goes to the county. Timelines and submittal lists come from the county, not from this post.
Deschutes County Code chapter 18.110 sets public development standards for Black Butte Ranch. As published, those standards include:
- For a single-unit dwelling, a front setback of 20 feet, a side setback of 10 feet, and a rear setback of 20 feet.
- A lesser setback at Black Butte Ranch "shall be approved" when the Architectural Review Committee, or its successor, gives written approval. The county says that ARC approval is not a county land-use decision.
- A 30-foot height limit for a single-unit dwelling, with limited exceptions pointed to elsewhere in the code.
- Maximum lot coverage of 40 percent for a single-unit dwelling and accessory structures, with greater coverage also approved on written ARC documentation.
- Off-street parking for at least two motor vehicles per dwelling.
- A 100-foot setback from the ordinary high water mark of streams, rivers, and lakes.
- Outdoor lighting that conforms to county lighting rules.
Those are county zoning standards, not the Ranch's aesthetic guidelines. If a design needs a smaller setback or more lot coverage than the code allows, the county looks for written ARC approval. That is one reason to talk with the ARC early, even on an addition.
Wildfire rules. Since April 1, 2026, ORSC R327 fire-hardening has been required for new dwellings and new accessory structures in all of unincorporated Deschutes County, including Black Butte Ranch. The county's page says remodels, additions, and partial repairs are not subject to R327. A new house or a new accessory structure is. Confirm the line between an addition and a new structure with the building official if the scope is large.
What about the Architectural Review Committee?
The official Ranch website confirms that an ARC exists, how to reach it, and that it meets. Deschutes County Code 18.110.060 recognizes the committee in writing for setback and lot-coverage decisions.
Beyond that, the specific design rules — materials, colors, trees, roofs, how far in advance to submit, and which remodel items need review — belong in the Ranch's own guidelines. We did not find a public, official copy of those guidelines to cite. The reliable next step is to request the current guidelines and application instructions from the ARC at the contact above, and to do that before drawings are finished or materials are ordered.
For a typical exterior remodel or addition, plan on two tracks and ask both offices what they need: the ARC, and Deschutes County Building Safety. Interior-only work may be simpler, but it is still worth confirming.
What if the property is in Sunriver instead?
Sunriver is also unincorporated Deschutes County, so the county still issues the building permit, and R327 still applies to new homes and new accessory structures. The Sunriver Owners Association project submittal process is a separate track. SROA says not to order or purchase materials for any exterior home project or landscaping until you have written authorization from its Community Development staff or Design Committee. Some projects also need a Sunriver Building Permit posted on site before work starts. The Design Committee meets on a published schedule.
The two communities have different private-review processes. Use the SROA page for Sunriver, and the Ranch ARC for Black Butte Ranch. Do not treat them as interchangeable.
What does Sisters Custom Homes’ process look like?
Cory Kent, owner-builder at Sisters Custom Homes, Oregon CCB #260626, takes on remodels and additions at Black Butte Ranch. He starts with a consultation on the house, the lot, and what you want to change. We then work through design and planning, including the drawings and applications the county will need, and we help you assemble what the Ranch asks for once we have its current requirements for your scope.
We prepare drawings and applications and work with you through submittal. We do not control the county's review clock or the ARC's meeting calendar, and we have not set a fixed sequence for those two reviews in this post. Ask the ARC at (541) 595-1529 or arc@blackbutteranch.com what your project requires, and confirm the county permit path with Deschutes County Building Safety. Our estimates are open-book. We have not published a standard remodel timeline or cost range, because both depend on the house, the scope, and those reviews.
You can read more about our remodel work, additions, our process, and Black Butte Ranch.
FAQ
Do I need Ranch approval to remodel at Black Butte Ranch?
Often, yes, especially for exterior work, but the exact trigger is in the Ranch's own guidelines, which we have not reproduced here. The official Ranch website lists the Architectural Review Committee; contact it at (541) 595-1529 or arc@blackbutteranch.com and ask what your project requires. Deschutes County still issues the building permit.
Who issues the building permit at Black Butte Ranch?
Deschutes County. The Ranch is unincorporated. The City of Sisters does not issue this permit.
Do wildfire building rules apply to a remodel at the Ranch?
The county says ORSC R327, in effect since April 1, 2026 in unincorporated Deschutes County, applies to new dwellings and new accessory structures, not to remodels or additions. Confirm unusual scopes with the building official.
Can the Architectural Review Committee allow a smaller setback?
Deschutes County Code says a lesser setback at Black Butte Ranch shall be approved based on written ARC approval, and that this is not a county land-use decision. Greater lot coverage can be approved the same way. That does not replace the rest of the county code or the Ranch guidelines.
Are ADUs allowed at Black Butte Ranch?
We have not confirmed that they are. The county's rural ADU checklist and DCC 18.116.355 apply to listed rural residential zones (RR-10, MUA-10, and, on the checklist, UAR-10, SR-2½, and WTZ), not to the Resort Community Zone, and the county's FAQ excludes unincorporated communities such as Tumalo, Terrebonne, or Sunriver from that program. The Ranch's own ADU rule, if any, was not readable on a public page (ARC and governing-document URLs redirect to the owner-portal login). We do not offer ADUs at the Ranch on the basis of the county rural program. Ask Deschutes County Planning and the ARC before you plan an ADU at the Ranch.
Talk with us
If you are considering a remodel, addition, or new home at Black Butte Ranch, start with a consultation or call 541-588-0162. Cory and Nikki Kent can help you sort out the county permit and the Ranch review before design goes too far.