What a general contractor does on a custom home or remodel in Central Oregon

Two people’s hands spread a printed architectural floor plan flat on a gray concrete surface.

A general contractor is the licensed person who runs a custom home or a remodel from start to finish: planning the work, pulling permits, hiring and coordinating the trades, and seeing the project through inspections. In Oregon, that license comes from the Construction Contractors Board. Sisters Custom Homes is a licensed general contractor (Oregon CCB #260626), and you can check any license, including ours, on the CCB’s public lookup. Here’s what that role looks like in Sisters, Bend, Black Butte Ranch, and Camp Sherman.

What does a general contractor actually do?

On a custom home or a remodel, the general contractor is the person responsible to you for the whole job, not just one trade. That usually means walking the site or the existing house with you, helping turn a list of wants into a buildable plan, checking what permits and reviews the work needs, preparing applications, hiring and scheduling the trades, and walking inspections through to close-out.

The starting point is different on a custom home than on a remodel. A new house begins with a lot, a design, and a full set of permits. A remodel begins with a house that is already there, and often with people still living in it. In both cases the contractor’s job is the same: to run the work as one project, not as a string of disconnected trades.

Sisters Custom Homes does this work in Central Oregon. Owner-builder Cory Kent has over 20 years of construction experience and stays involved from the first meeting to the final walk-through. You work with Cory and Nikki Kent, not a sales team. You can read more about our custom homes, our remodels, and our process.

Why does an Oregon CCB license matter?

In Oregon, a Construction Contractors Board license is required for a construction business that advertises, offers, bids, arranges for, or performs construction, alteration, home improvement, remodeling, or repair work. The CCB’s Consumer Tools page is the official place to read what that license covers.

According to that page, a CCB license lets you confirm that a contractor is actively licensed and has a surety bond, that the business submitted proof of liability insurance, and whether there are complaints or disciplinary actions in the past 10 years. The CCB can help mediate a dispute only if the contractor was licensed. Licensed contractors are the ones able to get the required building permits, and they have completed training and passed a test about laws and business practices for construction contracting.

A license does not, by itself, prove construction skill. The CCB is clear that Oregon does not require general contractors — other than plumbers, electricians, and a few other specific trades — to have training in construction itself. That is why it also tells you to check references. Using an unlicensed contractor has real costs: you lose the ability to recover damages through a bond and to get CCB help mediating a dispute.

How do you check a contractor’s license?

The official lookup is the CCB’s license search. The CCB says the most accurate way to search is with the license number. Contractors must put that number on their advertising, including their website.

Our number is Oregon CCB #260626. You can type that into the search, open the record, and confirm that the license is active and that the name matches Sisters Custom Homes, LLC. The record also shows complaint and disciplinary history, endorsements, bond, and insurance information. The CCB’s Home Improvement Month page walks through the same steps. You can also call the CCB at 503-378-4621.

How do you choose a general contractor?

Once the license checks out, the rest is about fit and a clear agreement. The CCB requires a written contract for construction agreements of more than $2,000, and it recommends a written contract for every job, including written changes. A useful contract describes the work, the materials, the costs, and the start and end dates. The CCB also says not to pay the full amount up front, not to pay in cash, and to write the check to the business name on the contract. It recommends checking references and talking with more than one contractor on a larger project, rather than agreeing on the spot.

Our estimates are open-book, with transparency around costs, markups, and profit. Every project is priced from its own scope, so we don’t publish standard costs or timelines. A good fit also means someone who already knows the towns where you want to build. Permit offices and local rules are not the same in Sisters as they are in Bend, at Black Butte Ranch, or in Camp Sherman.

Who issues permits in each town?

The general contractor helps you work with the office that has authority over the property. That office is different in each of the four towns this post is about.

  • Sisters. Deschutes County issues building permits for the City of Sisters under contract. The City still handles zoning, Dark Skies lighting, and a final site inspection. See our Sisters page.
  • Bend. Inside city limits, the City of Bend issues building permits. See our Bend page.
  • Black Butte Ranch. The Ranch is in unincorporated Deschutes County, so the County issues the building permit. The Ranch’s Architectural Review Committee may also need to review the work. See our Black Butte Ranch page.
  • Camp Sherman. Camp Sherman is in Jefferson County. Building permits go through Jefferson County Community Development. See our Camp Sherman page.

Requirements change, so the office with authority over your property is the one that applies. We confirm that at the start.

FAQ

What does a general contractor do on a custom home or remodel?

A general contractor runs the whole job: planning the work with you, coordinating drawings, pulling permits, hiring and scheduling the trades, managing construction, and walking inspections through to close-out. You have one licensed contractor responsible for the project, not a separate arrangement with each trade.

How do I check an Oregon general contractor’s license?

Use the Oregon Construction Contractors Board’s license search at search.ccb.state.or.us/search. The most accurate way is to enter the license number. Open the record to confirm the license is active, the name matches the business, and to review complaint and disciplinary history. Sisters Custom Homes is Oregon CCB #260626.

Why does a CCB license matter?

A CCB license is required in Oregon for a construction business that advertises, offers, bids, arranges for, or performs construction, remodeling, or repair work. Licensed contractors carry a bond and insurance, can obtain the required building permits, and can be part of the CCB’s dispute process. A license does not, by itself, prove construction skill, so you should still check references.

Do I need a written contract?

Yes, for construction agreements of more than $2,000. The Oregon Construction Contractors Board requires those agreements to be in writing, and it recommends a written contract for every job, including written changes. The contract should describe the work, materials, costs, and start and end dates.

Are you a general contractor in Sisters, Bend, Black Butte Ranch, and Camp Sherman?

Yes. Sisters Custom Homes is a licensed Oregon general contractor (CCB #260626) based in Sisters. We build custom homes and take on remodels, additions, and related work in Sisters, Bend, Black Butte Ranch, and Camp Sherman, along with Redmond and Sunriver.

Who issues building permits in those towns?

In Sisters, Deschutes County issues building permits for the City under contract. Inside Bend city limits, the City of Bend does. At Black Butte Ranch, Deschutes County does. In Camp Sherman, Jefferson County does.

Talk with us about your project

If you are planning a custom home or a remodel in Central Oregon, start with a consultation or call 541-588-0162. You can also read about our custom homes, our remodels, and the town pages for Sisters, Bend, Black Butte Ranch, and Camp Sherman.

Have a lot, a plan, or just an idea?

Call us at 541-588-0162 or email hello@sisterscustomhomes.com.